100H3-2: Triple Hanger Clamp for 2 Inch Center Collectors

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

100H3-2: Triple Hanger Clamp for 2 Inch Center Collectors100H3 2: Triple Hanger Clamp for 2 Inch Center Collectors The 100H3 2 is equipped with three poles with 2" centres. This model is suitable for clean, dry, indoor environments; and does not require staggered collector mounting. Cross bolt hanger clamps are designed to snap in place, but must be field adjusted for correct sliding tension after installing the conductor (unless used as an anchor). Interested in a 1. 5inch centre? Check out the 100H3 1

Â The unpredictable condition of outdoor weather is counteracted with a protective hood for additional protection

cranes and monorails

*Note: Can be located at any point but near the systems centre is preferable

The bar itself has skin-tight insulation which runs cooler and will not deform under the pressure of clamping

indoor environments

The bar is comprised of copper

which forms a higher amperage

Â Cross-bolt hanger clamps are factory set to snap in place

TE301CR: 30 Amp Short Shoe Collector

This collector has a rating of 50amps and has a copper graphite contact shoe

100PH: Snap-In Hanger with Rain Cover

two sleeves separated by 6" of conductor are used to prevent this from occurring